DM-12K Ground Audio Amplifier
Category Amplifiers
Professional Power Amplifier
DM SERIES - DM-12K
2 Channel
2 Ohm
Availability: In Stock
Categories:
Amplifiers
Tags:
Featured,
Top rated,
Trending,
SPECIFICATION
| MODEL | DM-12K DSP |
| 8 OHM STEREO POWER | 2000W |
| 4 OHM STEREO POWER | 3300W* |
| 2 OHM STEREO POWER | 5500W* |
| 8 OHM BRIDGE MODE | 6600W* |
| 4 OHM BRIDGE MODE | 12000W* |
| CHAN | 2 |
| AMPLIFIRE GAIN SELECTABLE | 26dB/32dB/38dB |
| INPUT IMPEDANCE | 20KΩ- 10KΩ (BALANCED/UNBALANCED) |
| DISTORTION THD,/20Hz-20KHz | ≤0.05% |
| CHANNEL SEPARATION | ≥70dB (8Ω LOAD, 1kHz AND BELOW) |
| SIGNAL NOISE RATION | ≥95dB (A WEIGHTED) |
| SLEW RATE | 35V / ɰ S |
| DAMPING COEFFICIENT (8 Ω) | ≥300 (8Ω LOAD, 1kHz AND BELOW) |
| FREQUENCY RESPONSE | 20Hz-20kHz (+0/-0.5dB, 1/4W INTO 8 OHMS |
| PROTECTION | SOFT START, VHF, DC PROTECT, SHORT CIRCUIT, CLIP LIMIT, OVER HEAT, PROGRESSIVE VOLUME |
| OUTPUT CIRCUIT | CLASS D+AB** |
| POWER SUPPLY | 230V-265V / AC 50Hz-60Hz |
| OUTLINE DIMENSION | 483MM X 501MM X 89MM |
| PACKING SIZE (MM) | 620MM X 590MM X 185MM |
| GROSS WEIGHT | 21.5KG |
|
REMARK:
|
| "*", Measured by pulse signal. | |
| "**" Class D + AB, PWM Modulate power supply + Class AB analog topology. | |
| The amplifier's PSU operates as a non-resistive load, so the calculation "Volts x Ampere=Watts" would not be correct. | |
| All specifications are subjected to change without notice. |